> For the complete documentation index, see [llms.txt](https://docs.moamocap.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.moamocap.com/getting-started/step-by-step/1.-tracker-settings/vive-ut/wifi-version/4-vive-ut-settings.md).
# (4) VIVE UT settings
1. Before configuring UT, you need to create a Map using the HMD. Please refer to [**here**](https://business.vive.com/us/support/vive-lbss/category_howto/creating-a-map-with-vive-manager.html) to create the map first, then proceed.
2. Click the **Tracker server** tab in the VBP Console.
3. Click the **Create** button.
4. Enter a **custom name** and the **IP address of your current PC**.
5. Click **Add** to save, and after saving, you can click the **pencil icon** to modify the content.
6. Navigate to the **Batch configuration** tab, then click the **VIVE Ultimate Tracker** tab.
7. After clicking the **Create** button, enter a **custom name** and change the **Connection & Tracking Mode** to **Wi-Fi LBE**.
8. Set the **Tracker server name** to the server you created earlier.
9. Enter the **SSID Name** and **Password** of the router connected to your PC, then click **Add** to save.
10. Connect the **Ultimate Tracker** to your PC via **USB**.
11. In the **Devices** tab, you can see the connected devices. If you don't see them, press the **UT's button** to wake it from standby.
12. Click the **Enroll** button for that UT.
13. Enter a **custom name**, and then change the **Connection & Tracking Mode** to **Wi-Fi LBE**.
14. Set the **Tracker server name** to the server you created earlier.
15. Just like in step 8, enter the **SSID** and **password**.
16. Wait until the **UT restarts**, then confirm that the **Enroll button** has changed to **Registered**.
17. Click the **Import tab**, and change **Import to (device type)** to **VIVE Ultimate Tracker**.
18. For **Map name**, select the map you created, and for **Batch configuration**, select the Batch configuration you created earlier.
19. Check the **UT device** to which you want to apply the map.
20. Check the pop-up that appears after clicking the **Import button** in the bottom right, and then click the **Import button** once more.
21. Wait until the **UT reboots**.
22. Once the **UT is back on**, click on the device in the **Devices tab** to confirm that the **Map name** and **Batch configuration** have been correctly applied.
23. Repeat steps **10 through 22** for all UTs you intend to use.
