> For the complete documentation index, see [llms.txt](https://docs.moamocap.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.moamocap.com/getting-started/step-by-step/3.-moa-settings/2-start-on-moa.md).
# (2) Start on MoA
1. Create an Actor. (1 for AVATA, 2 for ARENA)
2. Connect the device.
3. Select the type to use and assign devices to each body part.
1. The circular indicators on the Actor image represent the status of the Trackers. For VIVE UT, green means normal, and yellow means the Tracker has lost its position. If it's yellow, show the surrounding environment to the Tracker camera to help it recognize the environment.
4. Click the "Calibration" button to proceed with calibration. When doing it alone, you can set the "Delay" value to postpone the calibration start time. Maintain a T-pose during calibration. Once calibration is complete, move your body to verify that the calibration was done correctly.
* **Streaming**
* In the Streaming tab of the Network window, select the desired Software, configure according to the [link](https://docs.moamocap.com/feature/network-streaming/streaming), and click the Connect button to stream data.
* **Recording Motion**
* Enter the desired name in Slate, then click the red record button to start recording.
* To end recording, click the blue stop recording button to end/save the recording.
* Recorded files can be viewed in the Record Files window and can be played by clicking on them.
* Recording files with checked checkboxes can be exported as BVH files by clicking the Export button.
